We use vertical rolling contact type voltage regulator wounds with heavy sections of copper strips suitable for 100% continuous duty cycle or industrial applications, in comparison to conventional wire wound regulators used by other manufacturers, the carbon rollers move on both sides of the winding.
Introduction:
The Rectifier is a Device to Change High Voltage A.C to Low Voltage D.C used For Different Industrial Application Rectifier are Available In The Range Varying From 1 Volt To 100 Volt D.C With Current Output Varying From 10 Amp To 20000 Amp Which Is Suitable For Both H.T & L.T Supply.
BHARTI’s Rectifier Equipment Is Wound With Electrolytic Prime Grade Copper Strip To Minimize Power Losses. In Comparison To Aluminum Conductor Used By Many Other Manufacturers. Our Equipment Is Designed Liberally As Per Capacity And Is Ideally Suitable For Marginal Overloading Conditions.
We Use Vertical Rolling Contact Type Voltage Regulator Wounds With Heavy Sections Of Copper Strips Suitable For 100% Continuous Duty Cycle For Industrial Applications. In Comparison To Conventional Wire Wound Regulators Used By Other Manufacturers, The Carbon Rollers Move On Both Sides Of The Winding.
It is used for:
- Electro Plating
- Anodizing
- Hydrogeneration
- Cleansing
- Electro-Chemical Processes
Salient Feature:
- Asthetic Design
- Minimum Power Losses
- Less Power Consumption
- Low Maintenance
- Trouble Free Operation
- Long Life
ROLLER
- No waveform distortion at any load
- High power factors of more than 0.95 is achieved
- The system is simple & can be easily repaired
- Overall losses are less
- The copper section for a particular current is 3 times higher in roller regulators than in conventional
CONVENTIONAL
- Waveform distortion
- Power Factor is low between 0.5-0.9
- The system is specialized & need specially trained experts for repairing
- Overall losses are higher
- Copper section for a particular current is 1/3 than roller regulator type rectifier
